What You Need to Know Before You Buy a CNC Mill Turner
When people first start out in the world of woodworking, they usually think about turning and milling but once they get a handle on the techniques they eventually look to making furniture, fixtures and other specialty items. One of the last things that most people want to do is spend a lot of money buying their own CNC turn machine. Instead, they buy a CNC mill machine that has already been proven to be dependable is very expensive. That is why learning how to use the CNC turn-mill machine is very important and you must know where to get these machines to avoid paying more than you have to.
The best place to find a CNC mill machine is probably from your favorite tool supplier. They will not only give you the full story about the various mills available but also tell you where to get them. Because of this many people look at the internet to find out what machines are available but before you can even look, you must know where to get one.
If you happen to find the online store that sells the mill machines, it is important to check to see if there is a guarantee on the machine itself. Some companies will provide a warranty on the machine, or they may sell you the machine for a year. Always take the guarantee with a grain of salt because it is unlikely that the manufacturer is going to be able to fix all the problems with the mill.
Another thing that you need to know before you can buy is what kind of maintenance you are going to have to do. When you buy a mill turner, it is important to look into the weight limit of the machine and the distance that you are going to be able to move it. This is very important if you plan on using it in the basement, where you do not want to have the bed falling down or the head getting stuck in the door because it cannot move any further.
You may also want to check the packing and whether or not you need to sign a release form. It is best to not have to worry about any kind of legal issues because some machining companies do not follow the guidelines for safety. For example, they will try to sell you a machine that is simply too heavy to lift but because of its weight you may have trouble doing the machine up on your own.
The last thing you should look at is the cost of the machine because it is an expensive piece of machinery. Usually, CNC turners can run into thousands of dollars so make sure that you are getting the machine that you need. Make sure that you are getting one that has enough power to do all the work you want done and you do not want to be able to figure out how to use it.
Before you start shopping for one, you should have the know how of what you want to accomplish and who you want to get the machine for. If you plan on building something or want to change over from a lathe then you can buy a lathe mill instead of a CNC mill turner. However, if you just want to take care of some intricate tasks that may only require some hand tools then you should go for a CNC turner.
A CNC mill turner will make your life a lot easier but you must make sure that you know the tricks to use it and that you can do the work to make it work properly. There are different machines that do different things so keep an eye out for them and learn as much as you can.